CAPILENE CW 85 AVPolyethylene (PE)
Carmel Olefins
Bormed™ LE6600-PH is a resin intended for evaluation for use in Healthcare applications. Bormed™ LE6600-PH is an additive free low density polyethylene which is used to produce soft and flexible packaging for pharmaceutical products. The material can be converted via blow moulding, including blow-fill-seal technology, or IBM into small bottles or ampoules. It can also be used in injection moulding and blown film process. It is produced using tubular technology. The Bormed™ concept is based on the three core principles of service, commitment and conformance which cover the different aspects of active information management, change control and security of supply. Because we care. As part of the Bormed™ product portfolio, in case of notifiable change the grade can be made available up to 5 years (2 years pre-notification and last call volume with 3 years shelf life); subject to mutual agreement. Cas No. 9002-88-4 Typical characteristics Bormed™ LE6600-PH can be described with following typical characteristics: No additives Sterilisation: EtO; radiation Good flexibilty Applications Bormed™ LE6600-PH has been evaluated according to different regulations and standards.
Melt Flow Index (MFI) at 230°C / 2.16 kg, density, polymer melting point and tensile strength. The full Technical Data Sheet (TDS) is available on request.
Suited to injection moulding and forming applications such as rigid containers, caps and engineering parts that demand high stiffness and dimensional stability.